IHSE USA 471 Series Repeater/Cross- Repeater - Manual (Page 25)

APPENDIX B: RACK MOUNT OPTIONS
Rev. : 09/25/2012
25
Appendix B: Rack Mount Options
Repeater/Cross- Repeater units can be mounted in a 19” rack using the mounting kit.
Mounting Instruction Rackmount-Kit 473-5G
Using the Rackmount-Kit 473-5G, up to 4 devices of the device size 80x110x29mm can be
mounted into a 19“-Server Rack. The Rackmount Kit requires 1U Rackspace. Blindplates (in
the list of parts delivered) allow to cover unused device positions.
Rackmount-Kit 473-5G – List of parts delivered:
Mounting instruction:
•
Align the holes on the base plate with the vacant screw holes on the base of the device.
•
Fasten the base of the unit to the plate of the mounting kit
Only use the supplied, short screws, to prevent damages on
the PCB’s
•
Close the remaining gaps with blanking plates.
base plate 10 pieces spacer – M2,5x2
10 pieces M2,5x5 Philips type
countersunk screws
4 pieces blind plate