IHSE USA 471 Series Repeater/Cross- Repeater - Manual (Page 20)

REPEATER/CROSS- REPEATER
20
Rev. : 09/25/2012
CATx / Fiber Cross- Repeater
The Local Unit is connected via CATx (Fiber) connector A, The fiber connector B is
connected to the fiber connector A of the second Repeater. The Remote Unit is connected via
CATx (Fiber) connector B.
Reconfiguration of a Cross Repeater from „Local“ to „Remote“
or vice versa
The „Local“ device must carry the fiber GBIC in the connector B, the „Remote“ device in the
connector A. If the GBICs in your devices are plugged incorrect, you may alter the
configuration easily:
•
flap the shackle at the GBIC downwards
•
now pull the GBIC, using the shackle, out of the cage
•
plug the GBIC with soft force into the other cage until it snaps into place
•
flap the shackle at the GBIC upwards to lock the GBIC
Do not try to pull the GBIC out of the cage while the shackle
remains in the lock position (not flapped downwards). As long
as the shackle is flapped upwards, the GBIC is locked. Rough
pulling the GBIC out of the cage without flapping the shackle
downwards may result in damages at the GBIC and/or at the
device.
Local
Unit
Remote
Unit
Local
Remote