IHSE USA 471 Series Repeater/Cross- Repeater - Manual (Page 16)

REPEATER/CROSS- REPEATER
16
Rev. : 09/25/2012
3.5 Diagnostics
Each Repeater/Cross- Repeater is fitted with three indicator LEDs: Power, Data Error, Link
Status: The Power LEDs are next to the Power socket.
The location of the LEDs is shown below:
Diagnostic - LEDs at the Repeater/Cross- Repeater
LED Appearance Diagnostics
Power LED
(Red LED) Off
On Device not ready
Device ready
Link Status
(Green LED) Blinking
On No INTERCONNECT connection via CATx or
fiber cable
Device ready
Data Error
(Green LED) Indicator LED actually without function
Diagnostic LED
Data Error
Diagnostic LED
Link Status
Diagnostic LED
Power
Diagnostic LED
Link Status