IHSE USA 471 Series Repeater/Cross- Repeater - Manual (Page 11)

OVERVIEW
Rev. : 09/25/2012
11
2.5 Product Range
Repeater/Cross- Repeater
K471-CT CATx Repeater to raise the total allowed distance to up to
280m
K471-MM Multimode Repeater to raise the total allowed distance to
up to 800m
K471-SS Singlemode Repeater to raise the total allowed distance to
up to 20km
K471-CM CATx/Multimode Dual Cross Repeater to convert from
2x CATx to 2x Multimode or back
K471-DM CATx/Multimode Cross Repeater to convert from CATx to
Multimode or back
K471-CS CATx/Singlemode Cross Repeater to convert from CATx
to Singlemode or back
K471-DS CATx/Singlemode Dual Cross Repeater to convert from
2x CATx to 2x Singlemode or back
K471-MS Multimode/Singlemode Cross Repeater to convert from
Multimode to Singlemode or back
Zubehör
473-5G 19”/1HE Rackmout- Kit to mount up to 5 devices
473-1K
Mounting plate to mount by screws
473-2K
Mounting plate to mount by snap-on
2.6 How to Use This Guide
This guide describes the installation and configuration of the Repeater/Cross- Repeater.
Although the connection and operation of the system is relatively straightforward, you should
consider the following before getting started:
Connection & Compatibility
If you have purchased an Repeater/Cross- Repeater Kit, this will contain the device and the
universal switch mode p.s.u. to install your Repeaters/Cross- Repeater. Please see also:
Package Contents (page 12)