Hoefer SE400 - Manual (Page 18)

•
p10
Note: It is easier to keep the caster balanced if you turn
both cams toward the center of the caster.
glass plates (2)
clamps
(the number required
depends on the
plate length.)
spacers
leveling feet (4)
casting cradle
cams (2)
Insert the cam(s) in
the cam holes and
turn toward the center
to lock the glass plate
assembly.
gasket (foam side down)
Fig 5. Caster components
and assembly.
1. Lower the assembled sandwich
into the casting cradle.
2. Insert cams into the cam holes,
ridge end up.
3. Turn cam up to 180° until
the glass plates seal against
the gasket.