Harken Norseman, STA-LOK - Manual (Page 2)

Printed in USA. 4411 12/13
Harken equipment is designed for minimal maintenance, but some maintenance is
required to give the best service and to comply with the Harken limited
warranty.
In general, the most important aspect of maintenance is to keep your equipment
clean by frequently flushing with freshwater.
In corrosive atmospheres, stainless parts may show discoloration around holes,
rivets and screws. This is not serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and other caustic solutions can result
in discoloration of part and is not covered under the Harken warranty.
Maintenance
Warranty
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken ® catalog.
Printed in USA. 4411 12/13
Harken equipment is designed for minimal maintenance, but some maintenance is
required to give the best service and to comply with the Harken limited
warranty.
In general, the most important aspect of maintenance is to keep your equipment
clean by frequently flushing with freshwater.
In corrosive atmospheres, stainless parts may show discoloration around holes,
rivets and screws. This is not serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and other caustic solutions can result
in discoloration of part and is not covered under the Harken warranty.
Maintenance
Warranty
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken ® catalog.
Printed in USA. 4411 12/13
Harken equipment is designed for minimal maintenance, but some maintenance is
required to give the best service and to comply with the Harken limited
warranty.
In general, the most important aspect of maintenance is to keep your equipment
clean by frequently flushing with freshwater.
In corrosive atmospheres, stainless parts may show discoloration around holes,
rivets and screws. This is not serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and other caustic solutions can result
in discoloration of part and is not covered under the Harken warranty.
Maintenance
Warranty
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken ® catalog.
Printed in USA. 4411 12/13
Harken equipment is designed for minimal maintenance, but some maintenance is
required to give the best service and to comply with the Harken limited
warranty.
In general, the most important aspect of maintenance is to keep your equipment
clean by frequently flushing with freshwater.
In corrosive atmospheres, stainless parts may show discoloration around holes,
rivets and screws. This is not serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and other caustic solutions can result
in discoloration of part and is not covered under the Harken warranty.
Maintenance
Warranty
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken ® catalog.
Sta-Lok ® is a registered trademark of Sta-Lok Terminals, Ltd. Sta-Lok ® is a registered trademark of Sta-Lok Terminals, Ltd.
Sta-Lok ® is a registered trademark of Sta-Lok Terminals, Ltd. Sta-Lok ® is a registered trademark of Sta-Lok Terminals, Ltd.