Harken 477 Small Boat underdeck furling - Manual (Page 9)

477 Small Boat Underdeck Furler 9
477 Small Boat
Deck Drill Template
BOW
STERN
IMPORTANT! If you print this template from a computer file,
measure to confirm that template is the correct size.
3 1 /
4
" (83 mm)
477 Small Boat Underdeck Furler Deck Drill Template
Hole Saw Size
See Above
2 3 /
4
" (70 mm)
4 3 /
16
"
107 mm
1 3 /
8
" (35 mm)
Hole Saw Size Recommendations. Read before drilling.
2
1 /
2
" (65 mm) – Requires some beveling of bottom edge of deck hole to provide a good fit. Alternatively, a smaller hole
may be used to fashion a socket in deck to conform to ball shape. This may improve appearance and reduce amount
of water that enters.
2 3 /
4
" (70 mm) – Use if no beveling to underside of deck is desired.
Hole Saw Size
See Above
2 1 /
2
" (65 mm)
!