Harken 475 Wire Fairlead - Manual (Page 2)

Printed in USA. 4538 04/14
Wire fairlead places fairlead ahead of cam.
Holds line at cleat when not in use.
1. Place wire fairlead in its base so channel
and beveled bosses face up.
2. Sandwich fairlead legs between fairlead
base and cleat.
Thin red plastic cam base must remain
on cleat.
3. Place cam cleat on top of fairlead base
and mount cleat. See cam installation
instructions.
298 Wire Fairlead — Fits 150/365 Cams
Harken equipment requires minimal maintenance, but some is required to give the best
service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In
corrosive atmospheres, stainless parts may show discoloration around holes, rivets and
screws. This is not serious and may be removed with a fine abrasive.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken ® catalog.
Maintenance
Warranty
Additional information:
www.harken.com\manuals
Printed in USA. 4538 04/14
Wire fairlead places fairlead ahead of cam.
Holds line at cleat when not in use.
1. Place wire fairlead in its base so channel
and beveled bosses face up.
2. Sandwich fairlead legs between fairlead
base and cleat.
Thin red plastic cam base must remain
on cleat.
3. Place cam cleat on top of fairlead base
and mount cleat. See cam installation
instructions.
298 Wire Fairlead — Fits 150/365 Cams
Harken equipment requires minimal maintenance, but some is required to give the best
service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In
corrosive atmospheres, stainless parts may show discoloration around holes, rivets and
screws. This is not serious and may be removed with a fine abrasive.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken ® catalog.
Maintenance
Warranty
Printed in USA. 4538 04/14
Wire fairlead places fairlead ahead of cam.
Holds line at cleat when not in use.
1. Place wire fairlead in its base so channel
and beveled bosses face up.
2. Sandwich fairlead legs between fairlead
base and cleat.
Thin red plastic cam base must remain
on cleat.
3. Place cam cleat on top of fairlead base
and mount cleat. See cam installation
instructions.
298 Wire Fairlead — Fits 150/365 Cams
Harken equipment requires minimal maintenance, but some is required to give the best
service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In
corrosive atmospheres, stainless parts may show discoloration around holes, rivets and
screws. This is not serious and may be removed with a fine abrasive.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken ® catalog.
Maintenance
Warranty
Printed in USA. 4538 04/14
Wire fairlead places fairlead ahead of cam.
Holds line at cleat when not in use.
1. Place wire fairlead in its base so channel
and beveled bosses face up.
2. Sandwich fairlead legs between fairlead
base and cleat.
Thin red plastic cam base must remain
on cleat.
3. Place cam cleat on top of fairlead base
and mount cleat. See cam installation
instructions.
298 Wire Fairlead — Fits 150/365 Cams
Harken equipment requires minimal maintenance, but some is required to give the best
service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In
corrosive atmospheres, stainless parts may show discoloration around holes, rivets and
screws. This is not serious and may be removed with a fine abrasive.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken ® catalog.
Maintenance
Warranty
Additional information:
www.harken.com\manuals
Additional information:
www.harken.com\manuals
Additional information:
www.harken.com\manuals