Harken 3122 Flip-Flop Block - Manual (Page 2)

Printed in USA. 4277/07-12
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correct-
ly, follow faster size and type specifica-
tions or ensure deck thickness can result
in track pulling off deck suddenly and
unexpectedly during high loads, possibly
causing severe injury or death.
Printed in USA. 4277/07-12
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correct-
ly, follow faster size and type specifica-
tions or ensure deck thickness can result
in track pulling off deck suddenly and
unexpectedly during high loads, possibly
causing severe injury or death.
Printed in USA. 4277/07-12
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correct-
ly, follow faster size and type specifica-
tions or ensure deck thickness can result
in track pulling off deck suddenly and
unexpectedly during high loads, possibly
causing severe injury or death.
Printed in USA. 4277/07-12
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correct-
ly, follow faster size and type specifica-
tions or ensure deck thickness can result
in track pulling off deck suddenly and
unexpectedly during high loads, possibly
causing severe injury or death.
Printed in USA. 4277/07-12
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correctly,
follow faster size and type specifications or
ensure deck thickness can result in track
pulling off deck suddenly and unexpectedly
during high loads, possibly causing severe
injury or death.
Printed in USA. 4277/07-12
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correct-
ly, follow faster size and type specifica-
tions or ensure deck thickness can result
in track pulling off deck suddenly and
unexpectedly during high loads, possibly
causing severe injury or death.
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correct-
ly, follow faster size and type specifica-
tions or ensure deck thickness can result
in track pulling off deck suddenly and
unexpectedly during high loads, possibly
causing severe injury or death.
Printed in USA. 4277/07-12
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correct-
ly, follow faster size and type specifica-
tions or ensure deck thickness can result
in track pulling off deck suddenly and
unexpectedly during high loads, possibly
causing severe injury or death.
Printed in USA. 4277/07-12
Harken ® equipment requires minimal maintenance,
but some is required to give the best service and
to comply with the Harken ® limited warranty.
It is important aspect to keep equipment clean by
frequently flushing with fresh water. In corrosive
atmospheres, stainless parts may show discolor-
ation around holes, rivets and screws. This is not
serious and may be removed with a fine abrasive.
Important! Exposure to some teak cleaners and
other caustic solutions can result in discoloration of
part and is not covered under the Harken warranty.
Additional safety, maintenance, warranty information
see www.harken.com/manuals or the Harken ® catalog.
Maintenance
Warranty
Mount using (SH) Sockethead Cap Screws
3122/3194 Use 4 – 1 / 4 " (6 mm)
1987/1989 Use 4 – 5 / 16 " (8 mm)
WARNING! Failure to reeve block correct-
ly, follow faster size and type specifica-
tions or ensure deck thickness can result
in track pulling off deck suddenly and
unexpectedly during high loads, possibly
causing severe injury or death.
Printed in USA. 4277/07-12