Harken 332 Two-Speed Mainsheet System - Manual (Page 2)

Reeving Instructions
Harken equipment requires minimal maintenance, but some is required to give the best
service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In
corrosive atmospheres, stainless parts may show discoloration around holes, rivets and
screws. This is not serious and may be removed with a fine abrasive.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Maintenance
Warranty
Printed in USA 4539 01/14
332
3:1/6:1
383
4:1/8:1
Reeving Instructions
Harken equipment requires minimal maintenance, but some is required to give the best
service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In
corrosive atmospheres, stainless parts may show discoloration around holes, rivets and
screws. This is not serious and may be removed with a fine abrasive.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Maintenance
Warranty
Printed in USA 4539 01/14
332
3:1/6:1
383
4:1/8:1
Reeving Instructions
Harken equipment requires minimal maintenance, but some is required to give the best
service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In
corrosive atmospheres, stainless parts may show discoloration around holes, rivets and
screws. This is not serious and may be removed with a fine abrasive.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Maintenance
Warranty
Printed in USA 4539 01/14
332
3:1/6:1
383
4:1/8:1
Reeving Instructions
Harken equipment requires minimal maintenance, but some is required to give the best
service and to comply with Harken's limited warranty.
It is important to keep equipment clean by frequent flushing with fresh water. In
corrosive atmospheres, stainless parts may show discoloration around holes, rivets and
screws. This is not serious and may be removed with a fine abrasive.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Maintenance
Warranty
Printed in USA 4539 01/14
332
3:1/6:1
383
4:1/8:1