Public mode, Editing contacts and click-to-dial – Grandstream GXP21xx Series User Manual User Manual
Page 80
FIRMWARE VERSION 1.0.8.4 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL
Page 78 of 85
User can press “EndCall” softkey to end the page.
PUBLIC MODE
The GXP2120/GXP2110/GXP2100/GXP14xx supports hot desking using public mode. Under public mode,
users could login the phone with the SIP account User ID and password. Please follow the steps below to
configure the phone for public mode:
Fill up the SIP server address for account 1 first;
Under Web GUI->Settings->General Settings, set "Public Mode" option to "Yes". Click "Save and
Apply" and reboot the phone;
When the phone boots up, SIP User ID and Password to register to the configured SIP server in
account 1 will be required. Enter the correct account information to log in to the phone. When entering
the account information, press softkey "123"/"abc" to toggle input method;
In login page, pressing CONF button on the phone will show phone's IP address;
After using the phone, go to LCD MENU->LogOut to log off the public mode.
EDITING CONTACTS AND CLICK-TO-DIAL
From GXP2120/GXP2110/GXP2100/GXP14xx Web GUI, users could view contacts, edit contacts, or dial
out with Click-to-Dial feature
on the top of the Web GUI. In the following figure, the Contact page
shows all the added contacts (manually or downloaded via XML phonebook). Here users could add new
contact, edit selected contact, or dial the contact/number.
Before using the Click-To-Dial feature, make sure the option "Click-To-Dial Feature" under web
GUI->Settings->Call Features is turned on. By default it's disabled and the dialing icon in web GUI is in
grey
.
When clicking on the
icon on the top menu of the Web GUI, a new dialing window will show for you
to enter the number. Once Dial is clicked, the phone will go off hook and dial out the number from selected
account. Please see Figure 4 and Figure 5 in the following pages for more details.
Additionally, users could directly send the command for the phone to dial out by specifying the following
URL in PC's web browser, or in the field as required in other call modules.
http://ip_address/cgi-bin/api-make_call?phonenumber=1234&account=0&password=admin/123