Grandstream GXP21xx Series User Manual - Manual (Page 70)

FIRMWARE VERSION 1.0.8.4 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 68 of 85
Disable Telnet Disables Telnet access. The default setting is "No".
End User Password
Allows the administrator to set the password for user-level web GUI access.
This field is case sensitive with a maximum length of 30 characters.
Confirm Password Confirms the end user password field to be the same as above.
Admin Password
Allows users to change the admin password. The password field is purposely
hidden for security purpose. This field is case sensitive with a maximum length
of 30 characters.
Confirm Password Confirms the admin password field to be the same as above.
Maintenance -> Upgrade and Provisioning
Firmware Upgrade and
Provisioning
Specifies how firmware upgrading and provisioning request to be sent: Always
Check for New Firmware, Check New Firmware only when F/W pre/suffix
changes, Always Skip the Firmware Check.
XML Config File
Password The password for encrypting the XML configuration file using OpenSSL. This
is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User
Name
The user name for the HTTP/HTTPS server. When HTTP/HTTPS server
challenges for provisioning/upgrading request, phone will present prompt to
input user name and password.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server. When HTTP/HTTPS server
challenges for provisioning/upgrading request, phone will present prompt to
input user name and password.
Upgrade Via Allows users to choose the firmware upgrade method: TFTP, HTTP or HTTPS.
Always Authenticate
Before Challenge Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server.
Firmware Server Path
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
Config Server Path
Defines the server path for provisioning. It could be different from the firmware
server for upgrading.
Firmware File Prefix
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching prefix will be downloaded.
Firmware File Postfix
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching postfix will be downloaded.
Config File Prefix
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching prefix will be downloaded.