Grandstream GXP21xx Series User Manual - Manual (Page 54)

FIRMWARE VERSION 1.0.8.4 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 52 of 85
Call Center Status
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
Publish to Call Center
When set to "Yes", users could select "Away", "Online" or "Busy" from LCD
menu and publish it to call center. The default setting is "No".
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchronization. When it's
enabled, DND, Call Forward features and Call Center Agent status can be
synchronized between Broadsoft server and phone. The default setting is
"Disabled".
Broadsoft Call Park
When this option enabled, phone will send SUBSCRIBE to Broadsoft server to
obtain Call Park notifications.
Line Seize Timeout
For Shared Call Appearance, phone must send a SUBSCRIBE-request for the
line-seize event package whenever a user attempts to take the shared line off
hook. “Line Seize Timeout” is the line-seize event expiration timer. The default
value is 15 seconds.
Eventlist BLF URI
Configures the eventlist BLF URI on the phone to monitor the extensions in the
list with Multi Purpose Key. If the server supports this feature, users need to
configure an eventlist BLF URI on the service side first (i.e.,
[email protected]) with a list of extension included. On the phone, in
this "eventlist BLF URI" field, fill in the URI without the domain (i.e., BLF1006).
To
monitor the extensions in the list, under Web
GUI->Settings->Programmable Keys page, please select "eventlist BLF" in the
key mode, choose account, enter the value of each extension in the list.
Conference URI Configures the conference URI when using Broadsoft N-way calling feature.
Music On Hold URI
Configures Music On Hold URI to call when a call is on hold. This feature has
to be supported on the server side.
Force BLF Call-pickup by
prefix Configures to always use the prefix to BLF Call-pickup.
BLF Call-pickup Prefix
Configures the prefix prepended to the BLF extension when the phone picks
up a call with BLF key. The default setting is **.
PUBLISH for Presence Enables presence feature on the phone. The default setting is "No".
Special Feature
Different soft switch vendors have special requirements. Therefore users may
need select special features to meet these requirements. Users can choose
from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro, Huawei IMS
or Phonepower depending on the server type. The default setting is
"Standard". Phonepower is for GXP14xx only.
Account x -> SIP Settings -> Session Timer
Session Expiration The SIP Session Timer extension that enables SIP sessions to be periodically