beautypg.com

Security – Grandstream GXP21xx Series User Manual User Manual

Page 69

background image

FIRMWARE VERSION 1.0.8.4 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL

Page 67 of 85

IPv6 address type.

IPv6 Prefix

Enter the IPv6 Prefix (64 bits) when Prefix Static is used in "Statically
configured" IPv6 address type.

DNS Server 1

Enter the DNS Server 1 for IPv6.

DNS Server 2

Enter the DNS Server 2 for IPv6.

Preferred DNS server

Enter the Preferred DNS Server for IPv6.

Network -> Advanced Settings

802.1X mode

Allows the user to enable/disable 802.1X mode on the phone. The default
value is disabled. To enable 802.1X mode, this field should be set to
EAP-MD5.

802.1X Identity

Enter the Identity for the 802.1X mode.

MD5 Password

Enter the MD5 Password for the 802.1X mode.

802.1X CA Certificate

Upload 802.1X CA certificate to the phone; or delete existed 802.1X CA
certificate from the phone.

802.1X Client Certificate

Upload 802.1X Client certificate to the phone; or delete existed 802.1X Client
certificate from the phone.

HTTP Proxy

Specifies the HTTP proxy URL for the phone to send packets to. The proxy
server will act as an intermediary to route the packets to the destination.

HTTPS Proxy

Specifies the HTTPS proxy URL for the phone to send packets to. The proxy
server will act as an intermediary to route the packets to the destination.

Layer 3 QoS

Defines the Layer 3 QoS parameter. This value is used for IP Precedence,
Diff-Serv or MPLS. The default value is 12.

Layer 2 QoS
802.1Q/VLAN Tag

Assigns the VLAN Tag of the Layer 2 QoS packets. The default value is 0.

Layer 2 QoS 802.1p
Priority Value

Assigns the priority value of the Layer2 QoS packets. The default value is 0.

PC Port Mode

Configures the PC port mode. When set to "Mirrored", the traffic in the LAN
port will go through PC port as well and packets can be captured by
connecting a PC to the PC port. The default setting is "Enable".

PC Port VLAN Tag

Assigns the VLAN Tag of the PC port.

PC Port Priority Value

Assigns the priority value of the PC port.

Enable LLDP

Control the LLDP(Link Layer Discovery Protocol) service.

MAINTENANCE PAGE DEFINITIONS

Maintenance -> Web Access

This manual is related to the following products: