Grandstream GXP21xx Series User Manual - Manual (Page 19)

FIRMWARE VERSION 1.0.8.4 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 17 of 85
INSTALLATION
EQUIPMENT PACKAGING
Table 4: GXP2120/GXP2110/GXP2100/GXP14xx EQUIPMENT PACKAGING
Main Case Yes 1
Handset Yes 1
Phone Cord Yes 1
Power Adaptor Yes 1
Ethernet Cable Yes 1
Phone Stand Yes
2 for GXP2120/GXP2110/GXP2100/1450;
1 for GXP140x
Wall Mount Spacers Yes 2
Quick Start Guide Yes 1
CONNECTING YOUR PHONE
Table 5: GXP2120/GXP2110/GXP2100/GXP14xx CONNECTORS
Handset Port RJ9
Headset Port 2.5mm and RJ9 for GXP2120/GXP2110/GXP2100/1450; RJ9 for GXP140x
LAN Port
10/100Mbps RJ-45 port connecting to Ethernet;
Integrated PoE for GXP2120/GXP2110/GXP2100/GXP1450/GXP1405
PC Port 10/100Mbps RJ-45 port for PC connection
EXT Port Extension module connection port for GXP2120/GXP2110
Power Jack 5V DC Power connector port
To set up the GXP2120/GXP2110/GXP2100/GXP14xx, follow the steps below:
1. Attach the phone stand or wall mount to the back of the phone where there are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 3 (not applicable to GXP1400), this step could be
skipped;