GAI-Tronics MS05-101 Desktop Master Station consisting of Subset, Amplifier and Enclosure - Manual (Page 6)

Pub. MS05-101iom.2
Model MS05-101 Desktop Master Station Page: 6 of 11
\\86h27g1-fs\iomdocs\opnotes -- released\mi05-00x merge-isolate cabs\ms05-101.dir\ms05-101iom2.doc
03/09
Operation
ZONE SELECT
ALARMS
Figure 3. Model MS05-101S Desktop Master Subset Outline
Merging Zones
When merged, the stations in each zone share a page line and party line 1. Voice pages generated from
handset stations within one zone can be heard in another zone when the two zones are merged. Party line 1
can also be used to conduct a two-way conversation between zones.
It is possible to merge some zones while the remaining zones are isolated. Complete the following steps to
merge zones:
1. Select the desired Z ONE S ELECT push buttons (1 through 5 or ALL). This could be two zones, a
group of zones, or all zones. The green LED indicators located above each selected zone push button
illuminate.
2. Press the MERGE push button.
3. To isolate the zones, press the MERGE push button again followed by the Z ONE S ELECT RESET
push button.
N OTE : If the ALL push button is pressed, it merges all zones automatically—the MERGE push button
does not also need to be pressed. To isolate the zones, press the Z ONE S ELECT RESET push button.