GAI-Tronics 10959-209 Audio Messenger Interface for ADVANCE - Manual (Page 4)

Pub. 42004-492A
M ODEL 10959-209 A UDIO M ESSENGER I NTERFACE FOR ADVANCE P AGE
2 of 16
f:\standard ioms - current release\42004 instr. manuals\42004-492a.docx
08/14
Configurations
Alarms
The ACT tool includes pre-recorded tones suitable for almost any application. The tones include typical
emergency tones (e.g., a siren, slow whoop) and signaling or process tones (e.g., a gong, steady tone). All
of the tones and speech messages broadcast by the AMI are stored in MP3 file format. For applications
where a required tone is not supplied, any tone recorded or stored in an MP3 file format can be used with
the AMI.
Timed Events
The AMI has the capability to perform several functions based on the time of day. With the ACT
software, events can be scheduled to occur at any interval (e.g. hourly, daily, weekly, monthly).
Telephone Operation
The Telephone Interface has multiple operational modes. The appropriate mode is configurable by the
AMI Configuration Tool software application.
The AMI can provide passcode-protected telephone access to the system. The AMI can be configured to
allow telephone access only if the correct remote access security code is entered. The remote access code
is used to prevent unwanted callers from directly accessing the system. If the system is configured to use
a security code, callers are required to enter the correct code to gain access to the system. Day and Night
modes can have different security codes.