GAI-Tronics 10959-209 Audio Messenger Interface for ADVANCE - Manual (Page 15)

Pub. 42004-492A
M ODEL 10959-209 A UDIO M ESSENGER I NTERFACE FOR ADVANCE P AGE
13 of 16
f:\standard ioms - current release\42004 instr. manuals\42004-492a.docx
08/14
AMI Configuration Tool (ACT)
Overview
The Audio Messenger Interface Configuration Tool (ACT) software is used to define and change
configurations for the Audio Messenger Interface (AMI), and is included with all models of AMI. To
retrieve configurations and play audio messages, the AMI accesses a CompactFlash
® card. Each AMI is
shipped with a CompactFlash ® card pre-programmed with the AMI Factory Default configuration.
Please refer to the online help for specific instructions.
System Requirements
The ACT software must be installed on a Windows PC (minimum Windows 7, compatible with Window
8) equipped with a USB port. A reader/writer capable of programming CompactFlash
® memory cards
must be connected to the USB port. The CompactFlash ® reader/writer is not included with the AMI.
Configurable Parameters
Fragments
All tones and voice messages are digitally recorded and stored on the CompactFlash ® card as MP3 files.
Messages
Each message is a collection of fragments. The content of each message must be defined by selecting the
fragment(s) to be incorporated into the message. Other message parameters include:
 Message title
 Priority
 Volume
 Play mode and repeat interval
Inputs
Each input circuit is factory set and should not be changed.
 Title containing a brief text description of the input and its use
 The type of switch contact being used to activate the input (normally open, closed)
 The action of the switch (maintained, momentary, toggle on/off)
 Function of the input (activate a message, reboot, mute, etc.)