Compactflash, Card installation, Specifications – GAI-Tronics 10959-209 Audio Messenger Interface for ADVANCE User Manual
Page 17

Pub. 42004-492A
M
ODEL
10959-209
A
UDIO
M
ESSENGER
I
NTERFACE FOR
ADVANCE
P
AGE
15 of 16
f:\standard ioms - current release\42004 instr. manuals\42004-492a.docx
08/14
CompactFlash
®
The CompactFlash
®
memory card stores the system configuration, speech messages, and alarm tones.
Card Installation
When the memory card is being installed, complete the following instructions:
Insert the memory card through the rectangular MEMORY
CARD slot on the front panel. Ensure the
label on the memory card faces up and slide the memory card in until it is fully seated in the slot. When
seated properly, the card protrudes approximately ¼ inch from the front of the socket.
N
OTE
: The memory card and its socket are keyed for proper insertion – do not force the card into the
socket.
Reboot the system so the AMI unit can read the memory card.
Specifications
Power Supply Requirements
Voltage ......................................................................................... 12 V dc (UL listed) Class 2 power source
(plug-in 12 V dc power supply included with AMI)
Current ................................................................................................................................. 1 amp minimum
Power consumed .............................................................................................................. 10 watts maximum
Audio
Speech capacity ................................................................... 500 minutes with 512 Mb CompactFlash
®
card
Scheduled events ........................................................................................................................ 29 maximum
Frequency response ............................................................................ 250–6500 Hz, +0/−3 dB ref. to 1 kHz
Distortion ........................................................................................ <1% THD @ 1 kHz @ nominal settings
33-ohm page line............................................................................................................... 1.5 Vrms nominal
33-ohm party line .............................................................................................................. 1.5 Vrms nominal
Telephone line .................................................................................................................... −10 dBm nominal
Output
Status .................................................................................................................................... 1 amp maximum
Communications
ADVANCE ........................................................................................................................................ RS-485
Phone line ........................................................................................................................................... DTMF
Enclosure
Material .................................................. Steel body with aluminum cover; black, fine-textured paint finish
Mounting ............................................................................................................ 1U in standard 19-inch rack
Dimensions ....................................................... 17.00 W
11.18 D 1.72 H inches; (432 284 44 mm)
Weight ................................................................................................................................. 8.5 lbs. (3.86 kg)
Environmental
Temperature range ................................................................................... +32º F to +122º F (0º C to +50º C)
FCC Information
Complies with CFR47, Part 15 .......................................................................................................... Class A