GAI-Tronics 393-800A RED ALERT Hands-free WiFi Telephones - Manual (Page 9)

P UB . 42004-471C
H ANDS - FREE W I F I V O IP T ELEPHONES P AGE 7 of 26
f:\standard ioms - current release\42004 instr. manuals\42004-471c.doc
02/15
Conduit Installation Details (Surface-Mount Models)
GAI-Tronics recommends installing power lines in conduit to protect against accidental damage and
vandalism. To prevent moisture from entering the enclosure, we strongly recommend the following:
 Conduit should enter the enclosure from the bottom.
 Sealed fittings should be installed at all cable entry points.
 Silicone sealant or equivalent should be applied around and inside all conduit entries.
Please refer to the examples below for the recommended conduit installation details for surface-mount
telephones.
Figure 1. Bottom entry conduit recommended for
non-metallic enclosures
Figure 2. Top entry conduit installation for non-
metallic enclosures (NOT recommended)
Figure 3. Bottom entry conduit installation details
for metallic enclosures
Figure 4. Top entry conduit installation details for
metallic enclosures (NOT recommended)