Status indication, Power, Heartbeat – GAI-Tronics 393-800A RED ALERT Hands-free WiFi Telephones User Manual
Page 20: Eact, Wifi activity (wifi units only), Wifi ready (wifi units only), Wifi connected (wifi units only)
P
UB
.
42004-471C
H
ANDS
-
FREE
W
I
F
I
V
O
IP
T
ELEPHONES
P
AGE
18 of 26
f:\standard ioms - current release\42004 instr. manuals\42004-471c.doc
02/15
Status Indication
Power
The Power LED located on the VoIP PCBA illuminates when power is applied to the telephone. Refer to
Figure 18 for location.
Heartbeat
The Heartbeat LED located on the VoIP PCBA will flash when the telephone is operational over the
WLAN. Refer to Figure 18 for location.
EACT
The EACT LED located on the VoIP PCBA will turn ON when VoIP PCBA is connected to an Ethernet
device and flash when data is being transmitted. Refer to Figure 18 for location.
WiFi Activity (WiFi Units Only)
The WiFi Activity LED located on the WiFi module will turn ON when the VoIP telephone is powered
and flash when data is being transmitted. Refer to Figure 18 for location.
WiFi Ready (WiFi Units Only)
The WiFi Ready LED, a green LED on the RJ-45 connecter J2 located on the VoIP carrier PCBA,
illuminates when the WiFi Interface is ready to connect to a wireless network. Refer to Figure 18 for
location.
WiFi Connected (WiFi Units Only)
The WiFi Connected LED, a yellow LED on the RJ-45 connecter J2 located on the VoIP carrier PCBA,
illuminates when the WiFi Interface is connected to a wireless network or device. Refer to Figure 18 for
location.