Replacement parts & kits, Performance specifications, Replacement parts and kits – GAI-Tronics 10370-701 VoIP Interface/Amplifier Assemblies User Manual
Page 12

Pub. 42004-463A
Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies
Page 10 of 23
f:\standard ioms - current release\42004 instr. manuals\42004-463a.doc
09/13
Replacement Parts and Kits
Table 2. Spare Parts List
Part No.
Description
10370-
701
10370-
702
10370-
801
10370-
802
100-02-7013-000
VoIP PCBA
69625-001
VoIP Broadcast Carrier PCBA
69868-001
Ethernet Wireless Interface PCBA
Performance Specifications
Power Options
AC Power
Input voltage ............................................................................................................. 120/240 V ac, 50/60 Hz
Input current ...................................................................................... 0.35 A @ 120 V ac, 0.2 A @ 240 V ac
Power over Ethernet (PoE), -701 and -702 models only
Power ............................................................................................................... 802.3af compliant (via RJ45)
Audio
Output
Speaker output power
With PoE ......................................................................................................... 8 W into 8-ohm load, or
6 W into 70.7 V/100 V system
With 120/240 V ac input ............................................................................... 30 W into 8-ohm load, or
24 W into 70.7 V/100 V system
Line out (into 600 ohms) .................................................................................................................. 1.0 Vrms
Frequency response .................................................................................................................... 300–3000 Hz
Network (Ethernet)
Signaling ....................................................................................... SIP (RFC3261 compliant) Loose routing
Configuration .............................................................................................................. Embedded web server
Embedded Telnet server
Configuration file download
Configuration file building tool (Vconf.exe)
Direct serial connection
(Nine-way D-type female connector)
Command line interface
SNTP with time zone and daylight saving
Automatic updating via TFTP
Password protection
Control Outputs
Output 1 (isolated solid state switch) ..........................................50 milliamps @ 30 V ac/dc (resistive load)
Output 2 (isolated SPST relay) .......................................................... 10 amps @ 30 V ac/dc (resistive load)