GAI-Tronics 10370-701 VoIP Interface/Amplifier Assemblies - Manual (Page 10)

Pub. 42004-463A
Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 8 of 23
f:\standard ioms - current release\42004 instr. manuals\42004-463a.doc
09/13
Features and Functions
The GAI-Tronics Models 10370-70x VoIP and 10370-
80x VoIP WiFi Interfaces are equipped with the
following features:
 Wired or WiFi VoIP
 One-way broadcasting from IP network
 Weatherproof enclosure
 30-watt speaker amplifier (into an 8-ohm speaker
load) 10370-x01 series
 25-watt, 70.7V or 100V audio output, 10370-x02
series
 600-ohm audio output (all models)
 Two dry contact closure outputs
 SIP compatible (RFC3261)
 Real-time alarm reporting via email, Syslog, or
TMA software
 Configurable via web page, serial link or download
 Multicast capability, up to eight addresses
System Requirements and Limitations
A 100 baseT Ethernet with SIP Server is required for systems containing three or more VoIP Speaker
Interface/Amplifier Assemblies. The operation of this equipment is limited by the customer’s LAN
media capabilities and the services available at each end point. The performance of the VoIP Speaker
Interface is dependent on the provision of sufficient bandwidth and prioritization on the network to give
the quality of service required. In addition, the setup, installation, and software version of key
components such as switches and routers can have a significant effect on the operation of this equipment.
Improper connections or loose cables can also affect their operation.
The VoIP Speaker Interface/Amplifier Assemblies require a local 120/230 V ac power source for
operation.
Figure 1. Model 10370 Series Outline
Diagram