FSR HD-H70-SP - Manual (Page 10)

10
HD-H70-SP-Rx Rear Panel
ID Name Description
1 Power Connect to a power supply via a power adapter to
either the transmitter or receiver side 18VDC input.
Note: It is only necessary to power one side (Tx or
Rx)
2 HDBT IN Connect to the transmitter via a CAT5e / CAT6 /
CAT6A / CAT7 cable.
3 IR IN
Connect to an IR receiver cable.
4 IR OUT
Connect to an IR emitter cable.
5 RS-232 Used to connect to a computer to update firmware or
connect a RS-232 control device.
6 HDMI OUT Connect to a Display via an HDMI cable.
7 Mode Switch
Normal:
HD -H70 -SP- Rx
DC 18V HDB T IN HD MI O UT RS -232 IR IN IR OUT
RS-232
MODE
1 2 3 4 5 6 7
IR IN IR OUT Tx Rx HDMI OUT +
-