Foxconn 6627MA-RS2H User Manual

Page 49

Chapter 3 BIOS Description

Load Optimized Defaults

Select this option and press , and a dialogue box will pop up to let you

load the optimized BIOS default settings. Select and then press to

load the optimized defaults. Select and press to exit without loading.

The defaults set by BIOS are the optimized performance parameters for the

system, to improve the performance of your system components. However, if the

optimized performance parameters are not supported by your hardware devices,

it will likely cause system reliability and stability issues. If you only want to load the

optimized default for a single option, select the desired option and press the

key.

Set Supervisor/User Password

The access rights and permissions associated with the Supervisor password are

higher than those of a regular User password. The Supervisor password can be

used to start the system or modify the CMOS settings. The User password can

also start the system. While the User password can be used to view the current

CMOS settings, these settings cannot be modified using the User password.

When you select the Set Supervisor/User Password option, the following message

will appear in the center of the screen, which will help you to set the password:

Enter Password:

Enter your password, not exceeding 8 characters, then press . The

password you entered will replace any previous password. W hen prompted,

key in the new password and press .

If you do not want to set a password, just press when prompted to enter

a password, and the following message will appear on the screen. If no pass-

word is keyed in, any user can enter the system and view/modify the CMOS

settings.

PASSWORD DISABLED!!!

Press any key to continue

…

Under the menu

“Advanced BIOS Features Setup”, if you select “System” from

the Security Option, you will be prompted to enter a password once the system

is started or whenever you want to enter the CMOS setting program. If the incor-

rect password is typed, you will not be permitted to continue.

Under the menu

“Advanced BIOS Features Setup”, if you select “Setup” from the

Security Option, you will be prompted to enter a password only when you enter

the CMOS setting program.

PDF 文件使用 "pdfFactory" 试用版本创建