Foxconn BLACKOPS - Manual (Page 86)

79
5
5-2 BIOS Configuration
1. Enter the BIOS setup by pressing key during the POST(Power On Self Test).
2. Select the “Integrated Peripherals” from the “Main menu”, then select the
“OnChip
IDE Device” item and press to go to the configuration items.
3. Select and Set the “SATA Mode” option to �RAID��.
4. Press to save the setting then PC will reboot itself.
5-3 Create RAID in BIOS
enter RAID BIOS Setup
When BIOS is restarted, it will display a message asking you to press + keys
simultaneously to enter the main menu of Intel
® Matrix Storage Manager Option ROM
Utility. Press the + to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume 3. Reset Disks to Non-RAID
2. Delete RAID Volume 4. Exit
RAID Volume :
None Defined.
Physical Disks:
Port Drive Model Serial # Si�e Type/Status(Vol ID)
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB Non-RAID Disk
2 Maxtor 6L250S0 L50SKP4G 232.9GB Non-RAID Disk
4 ST3320620SV 9QF4YJGQ 298.1GB Non-RAID Disk
5 ST3300831AS 3NF02XH2 279.5GB Non-RAID Disk
[↑↓]-Select [ESC]-Exit [Enter]-Select Menu
Intel(R) Matrix Storage Manager option ROM v7.6.0.1006 ICH9R wRAID5
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
� DISC/VOLUME INFORMATION ��
� Main Menu ��
1. Create RAID Volume
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
SATA Mode RAID Item Help
LEGACY Mode Support Disabled
x Robson Support Disabled Menu Level ►
OnBoard IDE/SATA Chip IDE Mode
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults