Foxconn BLACKOPS - Manual (Page 38)

31
3
Advanced BIOS Features
► Hard Disk Boot Priority
This option is used to select the Priority for HDD startup. After pressing , you can
select the HDD using the Up/Down arrow keys, and change the HDD priority using /
; you can exit this menu by pressing .
► CPU L1 & L2 Cache
Enable/Disable CPU cache setting. L1, L2 cache are small, fast memory caches that are built
into a CPU and help speed access to important and frequently-used data. L1 cache is typically
smaller and faster than L2 cache. L1 cache is an abbreviation of Level 1 cache.
► CPU L3 Cache
This item will be displayed only if your CPU is supporting this feature. If the CPU do support
L3, you may set this item to enable or disable. Leave this item at the default value for better
performance.
► Hyper-Threading Technology
Hyper-Threading Technology allows one physical processor package to be perceived as two
separate logical processors within the operating system. This option is used to enable or dis-
able the feature. It will be displayed only if your CPU is supporting this feature.
► First/Second/Third Boot Device
These three options allow you to select the priority of boot sequence from different devices.
► Boot Other Device
With this function set to enable, the system will boot from some other devices provided that the
first/second/third boot devices failed.
► Boot Up Floppy Seek
This item controls whether the BIOS will be checking for a floppy drive while booting up. If it
cannot detect one (either due to improper configuration or physical unavailability), it will appear
an error message. Disabling this function, then POST will not detect the floppy.
► Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
► Hard Disk Boot Priority Press Enter Item Help
CPU L1 & L2 Cache Enabled
CPU L3 Cache Enabled Menu Level ►
Hyper-Threading Technology Enabled
First Boot Device Hard Disk Select Hard Disk Boot
Second Boot Device CD-ROM Device Priority
Third Boot Device USB-ZIP
Boot Other Device Enabled
Boot Up Floppy Seek Disabled
Boot Up NumLock Status On
Gate A20 Option Fast
Security Option Setup
APIC Mode Enabled
MPS Version Control for OS 1.4
OS Select for DRAM > 64MB Non-OS2
Delay For HDD (Secs) 0
Full Screen Logo Show Enabled
Small Logo(EPA) Show Enabled
Summary Screen Show Disabled
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Press Enter