Foxconn BLACKOPS - Manual (Page 110)

103
5
5-4 Install a New Windows XP
1. Press to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the “First Boot Device” to “CDROM”, save changes and exit the BIOS setup.
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press key
immediately. If you forgot to do this, PC will go to an fatal blue screen, and you
may need to reboot the system again. PC may not respond to your input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a 3rd party SCSI or RAID driver.
W
hen you set the SATA Mode in BIOS to either AHCI or RAID, you need
to follow these steps to install your Windows XP system.
C
AU
TI
O
N
!
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
► Hard Disk Boot Priority Press Enter Item Help
CPU L1 & L2 Cache Enabled
CPU L3 Cache Enabled Menu Level ►
Hyper-Threading Technology Enabled
First Boot Device CD-ROM Select Hard Disk Boot
Second Boot Device Hard Disk Device Priorty
Third Boot Device USB-ZIP
Boot Other Device Enabled
Boot Up Floppy Seek Disabled
Boot Up NumLock Status On
Gate A20 Option Fast
Security Option Setup
APIC Mode Enabled
MPS Version Control for OS 1.4
OS Select for DRAM > 64MB Non-OS2
Delay For HDD (Secs) 0
Full Screen Logo Show Enabled
Small Logo(EPA) Show Enabled
Summary Screen Show Disabled
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CD-ROM