Foxconn BLACKOPS - Manual (Page 58)

51
3
multiple boot devices user from pressing �Esc�� key to enter boot menu.
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On Self Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
► Hardware Jumper Selected
When BIOS_SELECT jumper, which is on the motherboard, is set to 1-2 or 3-4, this item will
auto detect power-on boot BIOS.
► Software Item Selecting
When BIOS_SELECT jumper, which is on the motherboard, is set to 5-6 or 7-8, you can select
the power-on boot BIOS by this item. Its default is BIOS ROM 1.
Board Information
► Model Name
This item shows the model name.
► BIOS ID/Version
This item shows the BIOS ID/version.
► BIOS Build Date
This item shows the BIOS building date.
► OnBoard LAN 1/2 MAC Address
This item shows the onboard LAN 1/2 MAC address.
System Status Power LED Status Stop Blinking Condition
Normal Always On Always On
No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK
No Display Continue blinking On (2sec.), Off (2sec.) Reboot & Display OK
Post Error Message
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Enter Setup or Skip
No CPU Fan Continue blinking On (1/2sec.), Off (1/2sec.) Reboot & Fan OK
Phoenix - AwardBIOS CMOS Setup Utility
Board Information
Model Name BlackOps Item Help
BIOS ID X48A01.F1.D.08.BlackOps
BIOS Version D08 Menu Level ►
BIOS Build Date 03/05/2008
OnBoard LAN 1 MAC Address 00 01 6C 00 00 01
OnBoard LAN 2 MAC Address 00 01 6C 00 00 02
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults