Foxconn BLACKOPS - Manual (Page 41)

34
3
Integrated Peripherals
► OnChip IDE Device / OnBoard Device Control / USB Device Setting
Press to go to relative submenu, please refer to the next sections.
► OnBoard FDC Controller
This item is used to enable or disable the onboard FDC controller.
► OnBoard Serial Port
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port.
► OnBoard IrDA Port
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard infrared infrared
device.
► IrDA Duplex Mode
This item allows you to select the infrared mode of the onboard infrared device.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
► OnChip IDE Device Press Enter Item Help
► OnBoard Device Control Press Enter
► USB Device Setting Press Enter Menu Level ►
OnBoard FDC Controller Enabled
OnBoard Serial Port 3F8/IRQ4
OnBoard IrDA Port 2F8/IRQ3
IrDA Duplex Mode Half
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help ��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Press Enter