Foxconn BLACKOPS - Manual (Page 28)

21
2
3. Install the Chipset Fan
4. Quantum Flow-GPU Blower
The 120mm fan provides good cooling for the graphics card, especially in multi-GPU setups.
5. PCB Tray
If you choose not to use the chassis, you can configure the motherboard in an open environment
as depicted.
First place the chipset fan above heatsink cooler, its attach 3-wire connector to the
NB fan header on the motherboard, then use the screws to fasten it.
Note: The PCB tray(in the package) is under the motherboard.