beautypg.com

Foxconn 925XE7AA-8EKRS2 User Manual

Page 63

background image

Chapter 3 BIOS Description

55

925XE7AA Series User Manual

Power Management Events Menu

Wake up by PCI card (Default: Enabled)
This option is used to set the system to wake up by PCI card. The setting

values are: Disabled and Enabled.

Wake up by Ring (Default: Enabled)
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant

hardware and software. The setting values are: Disabled and Enabled.

Wake up On LAN (Default: Enabled)
This option is used to set the system to wake up onboard Lan 5788. The
setting values are: Disabled and Enabled.

USB KB/MS Wake-Up From S3 (Default: Disabled)
This option is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode. The setting values are: Disabled and Enabled.

Resume by Alarm (Default: Disabled)
This option is used to set the timing of the startup function. In order to use this
function, the PC power source must not be turned off. The setting values are:
Disabled and Enabled.

Date (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this option will be modified. It is
used to set the timing for the startup date. The setting values contain 0 - 31.

Time (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this option will be modified. It is
used to set the timing for the startup time. The setting values contain hh:0 –
23; mm:0 – 59; ss:0 – 59.

This manual is related to the following products: