Foxconn 925XE7AA-8EKRS2 - Manual (Page 62)

Chapter 3 BIOS Description
54
925XE7AA Series User Manual
CPU THRM-Throttling (Default: 50.0%)
This option is used to specify the CPU speed (at percentage) to slow down
the CPU when it reaches the predetermined overheat temperature. The
setting values are 75.0%, 50.0%, 25.0%.
Power Management Events
Press to set the items of power management events. Please refer to
page 55.
Primary/Secondary IDE 0 (Default: Disabled)
When these items are enabled, the system will restart the power saving timeout
counters when any activity is detected on any of the drives or devices on the
primary or secondary IDE channels. The setting values are Disabled and Enabled.
FDD, COM, LPT Port (Default: Disabled)
when this item is enabled, the system will restart the power saving timeout
counters when any activity is detected on the floppy disk drive, serial port, or
the parallel port.
PCI PIRQ[A-D]# (Default: Disabled)
When this option is disabled, any PCI device set as the Master will not power
on the system.