Foxconn 925XE7AA-8EKRS2 - Manual (Page 32)

Chapter 2 Installation Instructions
24
925XE7AA Series User Manual
Chassis Intruder Connector: INTR
The connector connects to the chassis security switch on the case. The system
can detect the chassis intrusion through the status of this connector. If the con-
nector has been closed once, the system will send a message. To utilize this
function, set “Case Open Warning” to “Enabled” in the “PC Health Status” section
of the CMOS Setup. Save and exit, then boot the operating system once to make
sure this function takes effect.
INTR
1 2
INTRUDERJ
GND
Speaker
The speaker connector is used to connect speaker of the chassis.
SPEAKER
NC
S P K
SPKJ
Empty