Foxconn 925XE7AA-8EKRS2 - Manual (Page 31)

Chapter 2 Installation Instructions
23
925XE7AA Series User Manual
Front Audio Connector: F_AUDIO (for 6-channel)
The audio interface provides two kinds of audio output choices: the Front Audio,
the Rear Audio. Their priority is sequenced from high to low (Front Audio to Rear
Audio). If headphones are plugged into the front panel of the chassis (using the
Front Audio), then the Line-out (Rear Audio) on the rear panel will not work. If you
do not want to use the Front Audio, pin 5 and 6, pin9 and 10 must be short, and
then the signal will be sent to the rear audio port.
AUD_OUT-L
NA
MIC_IN
MIC_PWR
F_AUDIO
MIC_GND
+5VA
AUD_OUT-R AUD_RET-R
Empty
AUD_RET-L
1
Front Audio Connector: F_AUDIO (for 8-channel)
The audio interface provides two kinds of audio output choices: the Front Audio,
the Rear Audio. Their priority is the same. Front Audio supports re-tasking
function.
PORT2_L
SENSE_SEND
PORT1_L
PORT1_R
F_AUDIO
AUD_GND
PRESENSEJ
PORT2_R SENSE1_RETURN
EMPTY
SENSE2_RETURN
1 2
2