Foxconn 925XE7AA-8EKRS2 - Manual (Page 25)

Chapter 2 Installation Instructions
17
925XE7AA Series User Manual
HDD Connector: IDE1, IDE2, IDE3
This motherboard implements three IDE connectors: IDE1, IDE2, IDE3. IDE1
connector supports the provided Ultra DMA 100/66/33 IDE hard disk ribbon
cable. IDE2/3 connectors support up to four Ultra DMA 133/100/66 IDE hard disk
drives that you can configure as a disk array through onboard IDE RAID controller.
Refer to RAID manual for details on how to set up RAID configurations.
Connect the cable’s blue connector to the IDE connector, then connect the gray
connector to the Ultra DMA slave device (hard disk drive) and the black con-
nector to the Ultra DMA master device.
ATA 100/66/33 IDE1
1
1 1
ATA 133/100/66 IDE2/3