Foxconn 655A01-FX-6LRS - Manual (Page 66)

Chapter 3 BIOS Description
58
655A01 Series User Manual
Load Optimized Defaults
Load Fail-Safe Defaults
Press to select this option. A dialogue box will pop up that allows you
to load the default BIOS settings. Select and then press to load
the defaults. Select and press to exit without loading. The defaults
set by BIOS set the basic system functions in order to ensure system stability.
If your computer cannot POST properly, you should load the fail-safe defaults
to restore the original settings. Then carry out failure testing. If you only want
to load the defaults for a single option, you can select the desired option and
press the key.
Select this option and press , and a dialogue box will pop up to let you
load the optimized BIOS default settings. Select and then press
to load the optimized defaults. Select and press to exit without
loading. The defaults set by BIOS are the optimized performance parameters
for the system, to improve the performance of your system components.
However, if the optimized performance parameters are not supported by your
hardware devices, it will likely cause system reliability and stability issues. If
you only want to load the optimized default for a single option, select the
desired option and press the key.
Set Password
When you select the Set Password option, the following message will appear in
the center of the screen, which will help you to set the password:
Enter Password:
Enter your password, not exceeding 8 characters, then press . The
password you enter will replace any previous password. When prompted, key
in the new password and press .
If you do not want to set a password, just press when prompted to
enter a password, and in the screen the following message will appear. If no
password is keyed in, any user can enter the system and view/modify the
CMOS settings.
PASSWORD DISABLED!!!
Press any key to continue …