Foxconn 655A01-FX-6LRS - Manual (Page 35)

27
655A01 Series User Manual
Chapter 2 Installation Instructions
Audio Interface: CN10
The audio interface provides two kinds of audio output choices: the Front Audio,
the Rear Audio. Their priority is sequenced from high to low (Front Audio to Rear
Audio). If headphones are plugged into the front panel of the chassis (using the
Front Audio), then the Line-out (Rear Audio) on the rear panel will not work. If you
do not want to use the Front Audio, pin 5 and 6, pin9 and 10 must be unlocked,
and then the signal will be sent to the rear audio port.
CN10
Microphone
MIC_VCC
L_OUT
R_OUT
AGND
A5V
FR_OUT
Empty
FL_OUT
1
NC
SPDIF/6CH_BRACKET: CN7
The SPDIF/6CH_BRACKET output is capable of providing digital or 6 channel
audio to external speakers, or compressed AC3 data to an external Dolby digital
decoder. The motherboard is equipped with one bracket.
Attention:
The empty pin of the SPDIF cable should be aligned to pin 9
on the SPDIF/6CH_BRACKET.
CN7
1
SPDIF CABLE
Empty
AGND
BASS
SR_OUT
VCC SPDIF_OUT
CEN_OUT
SL_OUT
SPDIF_IN
GND