Foxconn 655A01-FX-6LRS - Manual (Page 39)

31
655A01 Series User Manual
Chapter 2 Installation Instructions
BIOS-Protection Jumper: CN26
The motherboard BIOS is inside the FWH. If the jumper CN26 is set as enable
(Pin1 & Pin2), the system BIOS is protected from being attacked by a serious
virus, such as the CIH virus. You will be unable to flash the BIOS to the
motherboard when the system BIOS is protected.
BIOS_PROTECT
Disable
(Default)
BIOS_PROTECT
Enable
CN26
1. Disconnect the power cable before adjusting the jumper settings.
2. Do not clear the CMOS while the system is turned on.
Warning:
CPU Model Selection Jumper: CN9
CN9 default state is open, only supports northwood CPU and prescott CPU.
When you set CN9 close, you can use willamette CPU and northwood CPU.
3 1 2
1
2
Open
(Default)
CN9
Closed
1
2
3 1 2