Foxconn 655A01-FX-6LRS - Manual (Page 26)

Chapter 2 Installation Instructions
18
655A01 Series User Manual
4
3
2
1
Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
20-pin ATX power connector: PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is secure.
4-pin ATX_12V Power Connector: CN8
The ATX power supply connects to CN8 and provides power to the CPU.
Attention:
You have to press the power button for more than four seconds if
you change the default “Instant Off” setting to “Delay 4 Sec” from
the “Power Button Override” option in the BIOS Power Manage-
ment Setup.
20-pin ATX power connector
20
10
12V
5VSB
5V
GND 3.3V GND
5V
GND
PWR_OK 3.3V
11
1
5V GND 3.3V GND GND
5 V -5V GND PS-ON -12V
4-pin ATX_12V power connector
12V
12V GND
GND