Foxconn 655A01-FX-6LRS - Manual (Page 53)

45
655A01 Series User Manual
Chapter 3 BIOS Description
Performance Mode (Default: Disabled)
This option is used to disable or enable performance mode.
DRAM Timing control (Default: By SPD)
This option determines DRAM timing using SPD or manual configuration.
Only set as manual, the following 4 items can be updated.
DRAM CAS Latency (Default: 2.5T)
This option determines CAS Latency. The available setting values are: 2T, 2.5T, 3T.
RAS Active Time (tRAS) (Default: 6T)
This option determines RAS active time. The available setting values are: 4T - 9T.
RAS Precharge Time (tRP) (Default: 3T)
This option is used to define the idel clocks after issusing a precharge com-
mand to the SDRAM.The available setting values are: 2T - 5T.
RAS to CAS Delay (tRCD) (Default: 3T)
This option is used to define the minimum RAS to CAS delay using 1us
granularity. The available setting values are: 2T - 5T.
CH0/1 ADDR/CMD Rate (Default: AUTO)
This option is used to set CH0/1 ADDR/CMD rate. The available setting val-
ues are: AUTO, 1T, 2T.
DDR 128-Bit Access (Default: AUTO)
This option is used to set DDR 128-Bit access.The available setting values
are: Disable and AUTO.
DRAM Clock/Timing Control Menu