Foxconn 655A01-FX-6LRS - Manual (Page 37)

29
655A01 Series User Manual
Chapter 2 Installation Instructions
Warning:
The motherboard may be damaged if a 3.3V AGP card is used.
Make sure that your AGP card is 1.5V specification. Note the
notches on the card golden fingers to ensure that they fit the
AGP slot on your motherboard.
Installing an expansion card
1. Before installing the expansion card, read carefully the documentation that
came with it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing any expan-
sion cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is
completely seated in the slot.
5. Secure the card to the chassis with the screw you removed earlier.
AGP Qualified Vendor List
The following table lists the CPU modules that have been tested and qualified
for use with this Motherboard.
Vender Type Video Memory
MSI GeForce MX200Pro 64MB DDR/SDRAM
UNIKA GeForce 4 MX400 32MB SDRAM
CP ATI R9000 128MB DDR/SDRAM
CP ATI 9700 AGP(8x) 128MB DDR/SDRAM
ELSA GeForce 4 MX400 32MB SDRAM
Note:
Make sure to use only the tested and qualified AGP card listed
above. Other AGP card manufactured by other vendors may not
be suitable for this Motherboard.