Foxconn K8S760MG-6ELRS - Manual (Page 81)

74
Chapter 4 Driver CD Introduction
Testing the Connected Speakers
To ensure 4- or 6-Channel audio operation works properly, you may need to test
each connected speaker to make sure every speaker works properly. If any
speaker fails to sound, then check whether the cable is inserted firmly into the
connector or replace the bad speakers with good ones.
Testing Each Speaker
1. Click the audio icon from the window tray bar at the bottom of the
screen.
2. Click the Speaker Test tab.
3. The following window appears.
4. Select the speaker which you want to test by clicking on it.
Playing Karaoke
The Karaoke function will automatically remove human voice (lyrics) and leave
melody for you to sing the song. The function can only be used with the 2-
Channel audio configuration, so make sure “2-channel mode” is selected in
the “Number of Speakers” column before playing Karaoke.
Front Left
Rear Left Rear Right
Front Right
Center
Subwoofer
Playing Karaoke
1. Click the audio icon from the window tray bar at the bottom of the
screen.
2. Make sure the Sound Effect tab is selected.
3. Select Voice Cancellation in the “Karaoke” column.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:42 74