Foxconn K8S760MG-6ELRS - Manual (Page 56)

49
Chapter 3 BIOS Description
Integrated Peripherals
Integrated Peripherals Menu
SIS OnChip IDE Device
Press to set onchip IDE device. Please refer to page 51.
SIS OnChip PCI Device
Press to set onchip PCI device. Please refer to page 52.
Onboard SuperIO Device
Press to set onchip onboard SuperIO device. Please refer to page
53.
IDE HDD Block Mode (Default:Enabled)
This option is used to set whether the IDE HDD Block Mode is allowed. The
available setting values are: Disabled and Enabled.
Onboard Lan Boot ROM (Default: Disabled)
This option is used to decide whether to invoke the boot ROM of the onboard
LAN chip. The available setting values are: Disabled and Enabled.
Init Display First (Default:PCI Slot)
This option is used to set which display device will be used first when your
PC starts up. The available setting values are: PCI Slot and AGP.
USB0/1/2/2.0 Access Interface (Default: EDB Bus)
This option is used to set USB0/1/2/2.0 Access Interface. The available
setting values are: PCI Bus and EDB Bus.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:42 49