Foxconn K8S760MG-6ELRS - Manual (Page 31)

24
Chapter 2 Installation Instructions
K8S760MG Series User Manual
S-ATA Connectors: SATA-1, SATA-2
The S-ATA header is used to connect the S-ATA device to the motherboard.
These connectors support the thin Serial ATA cables for primary internal storage
devices. The current S-ATA interface allows up to 150 MB/s data transfer rate.
SPDIF Out Connector: SPDIF_OUT
The SPDIF out connector is capable of providing digital audio to external speak-
ers or compressed AC3 data to an external Dolby digital decoder.
5V
GND
Empty
SATA-1/SATA-2
GND
GND
GND
T X +
T X -
RX+
RX-
DATA
1
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:41 24