Foxconn K8S760MG-6ELRS - Manual (Page 35)

28
Chapter 2 Installation Instructions
K8S760MG Series User Manual
AGP Slot
This motherboard has an AGP slot that supports 1.5 V AGP cards. AGP is an
interfacing specification designed to display 3D images. It provides a specialized
66 MHz, 32-bit channel to allow the graphic controller to directly access the
master memory and supports 4X and 8X speeds.
AGP Slot
Installing an expansion card
1. Before installing the expansion card, read the documentation that came
with it and make the necessary hardware settings for the card.
2. Be sure to unplug the power cord before adding or removing expansion cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０ ．ｐ６５ 2004-9-14, 8:41 28