Foxconn IGPSK7MA-ERS - Manual (Page 58)

Chapter 5 nVIDIA RAID Introduction
51
2. Select the modules that you want to install. Select the relative options that you
have configured.
3. Click Next and then follow the on-screen instructions.
4. After the installation is completed, be sure to reboot the PC.
5. After the reboot, initialize the newly created array.
Installing the NVIDIA RAID Software Under Windows (for Non-bootable RAID
Array)
This section describes how to run the setup application and install the RAID
software which will upgrade the Windows IDE driver and install the RAID driver.
1. Start the nForce Setup program to open the NVIDIA Windows nForce Drivers
page.
NVIDIA RAID Utility Installation
ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５ 2004-11-15, 17:37 51