Foxconn IGPSK7MA-ERS - Manual (Page 43)

Chapter 3 BIOS Description
36
Power Management Setup
™ ACPI Suspend Type (Default: S1&S3)
This option is used to set the energy saving mode of the ACPI function.
When you select “S1 (POS)” mode, the power will not shut off and the power
supply status will remain as it is. In S1 mode the computer can be resumed
at any time. When you select “S3 (STR)” mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved in
memory, and the computer can quickly return to previous status when the STR
function wakes. When you select “S1 & S3” mode, the system will automatically
select the delay time.
™
Soft-Off by PBTN (Default: Instant-Off)
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply. When “Instant-Off” is selected, press
the power switch to immediately turn off power. When “Delay 4 Sec” is
selected, press and hold the power button for four seconds to turn off power.
™ S5 Resume by USB (Default: Disabled)
This option is used to set whether the system is resumed by USB equipment
when it is in S5 (Soft-off) mode.
™ Power-On by Alarm (Default: Disabled)
This option is used to start up your PC by alarm. When this option is enabled,
the following two items are activated and user can set the desired alarm date
and time. The setting values are Disabled and Enabled.
Power Management Setup Menu
ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５ 2004-11-15, 17:36 36