Foxconn IGPSK7MA-ERS - Manual (Page 16)

Chapter 2 Installation Instructions
9
Memory
This motherboard includes two 184-pin slots with 2.5 V Single-Channel DIMM
sockets, so you can install Single-Channel DDR266/333/400 memory. You must
install at least one memory bank to ensure normal operation.
Memory configurations
You may install 128 MB, 256 MB, 512 MB and 1 GB DDR DIMMs into the DIMM
sockets using the memory configurations in this section.
The following is important information on memory configurations:
1. The following table lists the DDR266/333/400/466/500 memory modules
that have been tested and qualified for use with this motherboard.
Vender Type Size
Apacer DDR400 512MB
Corsair DDR466 256MB
Corsair DDR500 256MB
LPT DDR433 256MB
LPT DDR466 256MB
LPT DDR466 512MB
LPT DDR500 256MB
LPT DDR400 512MB
Twinmos DDR333 1GB
Twinmos DDR400 1GB
Samsung DDR466 512MB
Samsung DDR400 256MB
Samsung DDR400 128MB
Samsung DDR266 256MB
Transcend DDR333 512MB
Infineon DDR333 256MB
MT DDR333 256MB
MT DDR400 128MB
NANYA DDR333 256MB
Kingmax DDR333 256MB
Kingmax DDR266 256MB
Kingmax DDR400 512MB
RAMOS DDR266 128MB
Elixir DDR400 256MB
Kingston DDR533 512MB
ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５ 2004-11-15, 17:36 9