Foxconn IGPSK7MA-ERS - Manual (Page 14)

Chapter 2 Installation Instructions
7
2. If required, apply a light coating of
silica gel to the top of the CPU.
NOTE: The CPU heat sink may have
a pre-applied thermal compound. In
that case, the silica gel is not required.
4. Connect the fan’s power cable
to the appropriate 3-pin terminal
on the motherboard.
1.Locate the CPU retention mechanism
base (surrounds the CPU socket).
3. Attach the fan to the base.
Installation of CPU Fan
The following procedure is provided for reference only, please refer to your
CPU fan user guide for the actual procedure.
Warning:
Excessive temperature will severely damage the CPU and
system. Therefore, make sure that the cooling fan works nor-
mally at all times in order to prevent overheating and damaging
to the CPU.
ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５ 2004-11-15, 17:36 7